Clone of TruDO Optical Dissolved Oxygen Sensors

Home > Shop Finesse Catalog > DO Sensors > Clone of TruDO Optical Dissolved Oxygen Sensors

Clone of TruDO Optical Dissolved Oxygen Sensors

Features

■	CIP, SIP autoclave compatible optical dissolved oxygen sensor
■	Equal or better performance than traditional DO sensors
■	Pressure and damage resistant membrane - up to 12 bar
■	Compatible with existing DO transmitters
■	4 ppb to 300% saturation range

TruTorr^® Single Use Headspace Pressure Sensor

The TruTorr pressure sensing system is a single-use solution for measuring headspace pressure in a single-use container, in order to prevent damage from overpressure. The product consists of a disposable pressure sensor, a cable, and a transmitter that is seamlessly integrated into Finesse TruViu hardware (RDPD, PLSSmini or PLSS).

The single-use sensor not only compensates for temperature, but is self-calibrated for immediate use, based on integrated, gamma radiation- resistant memory chip technology.

Environmental Specifications
Parameter	Units	Min	Typ	Max
Operating Temperature	°C	15		45
Operating Pressure	Psi (bar)		1(14.7)	6 (50)
Storage Temperature	°C	-20	22	70
Storage Relative Humidity (no-condesning)	%	0	60	90
Altitude	feet			10,000
Shock tolerance (non-operating)	shipping	JIS Z ):202:1994
Vibrations (50 to 500 Hz sinusoidal 0.25 octave/min)	G	3

Performance Specifications
	Min	Max
Sample Period (sec)	1	120
Measuring Range (psi, gage)	0	5.8
Resolution at 25°C (psi)	0.01
Limit of Detection (psi)	0.01
Accuracy at 20 °C	±10% of reading
Response Time (sec)	≤ 1
90% response (sec)	1
Drift in 60 days	TBD
Calibration	Pre-calibrated
Cross Sensitivity	None

-- to be continued
CAB-VP8-10, 10 ft/3m
CAB-VP-15, 15ft/5m

ReplacementCap
DOS-OPT-CAP

Polarizers
None required

Power Adapter for D4/T82 Cables
DOS-OPT-PWR-ADT

Like for Like 12mm
Replaces Broadley-James Model D140/D145
Replaces Mettler-Toledo/Ingold Model InPro 6800

TruDO is a registered trademark of Finesse Solutions, LLC.

DO Sensors